Actually good actuators: An introduction for technical buyers

November 18, 2026

Plant workers across industries are well aware that an actuator may meet a valve’s torque or thrust requirements but still be unsuitable for frequent modulation or demanding operating conditions. Control accuracy, duty cycle and maintenance requirements all influence how well an actuator performs over its service life.

This guide examines the main types of industrial actuators, their operating principles and the technical factors buyers should evaluate when selecting equipment for their applications.

What is an industrial actuator?

An industrial actuator is a device that moves a final control element, typically a valve or damper.

In an automated system, a controller sends a signal directing the actuator to change the position of the valve or damper. This movement regulates process variables such as flow or pressure.

For example, an actuator may position a valve to regulate water flow through a treatment plant. In a steel mill, it may adjust a furnace damper to control airflow. Depending on the equipment’s design, the required movement may be rotational or linear.

Rotary vs. linear actuators: what’s the difference?

Rotary actuators turn a shaft, while linear actuators move a stem or rod along a straight path. The valve or damper’s operating mechanism and movement requirements influence which actuator configuration an application needs.

Rotary actuators commonly operate quarter-turn valves and industrial dampers. In these applications, a 90-degree rotation typically moves the equipment between fully open and fully closed positions. Multi-turn rotary actuators rotate a shaft through multiple full 360-degree revolutions, compared to the 90 degrees of a quarter-turn actuator. They’re commonly used with valves that require several stem rotations to fully open or close, such as many gate valves.

Linear actuators apply a pushing or pulling force through a defined stroke. They’re commonly used with globe valves, where raising or lowering the valve stem regulates flow. Certain gate mechanisms also require linear movement.

Rising-stem gate valves are one example where both types of motion come into play. A threaded mechanism converts rotary output into linear stem movement. Beck’s Group 88 multi-turn rotary actuators are designed for these applications. For valves requiring longer stem travel, this configuration may be advantageous because multiple shaft rotations can produce the required movement without a linear actuator sized for the full stroke.

When specifying either design, buyers must consider the equipment’s mechanical requirements. Rotary actuators must provide sufficient torque and the required angle or number of turns. Linear actuators must deliver the necessary thrust and stroke length.

How do electric, pneumatic and hydraulic actuators differ?

Rotary and linear actuators can be powered by electric, pneumatic or hydraulic systems. Each technology has different operating characteristics and maintenance requirements.

Electric actuators

Electric actuators use a motor and gear train to position valves and dampers. Motor technology, gearing and lubrication influence positioning accuracy, duty cycle and maintenance requirements.

A common design uses an approximately 1,800 RPM induction motor with worm gearing to reduce output speed. These gear assemblies often require periodic oil changes. Frequent motor starts also generate heat, which can limit how often the actuator can reposition.

Beck uses a low-speed RPM permanent magnet synchronous motor and durable spur gears. The permanently greased components eliminate routine lubrication changes, while the motor supports 100% continuous-duty modulation. This design allows frequent positioning adjustments without overheating the motor from repeated starts.

Pneumatic actuators

Pneumatic actuators use compressed air to move a piston or diaphragm. Their relatively low upfront cost makes them attractive for facilities with existing compressed-air systems.

They’re commonly used for repetitive movement in packaging, clamping and stamping operations, where rapid actuation and simple on/off movement are often required. Chemical plants also use pneumatic actuators to operate process valves, while food and beverage facilities may favor them where hydraulic fluid leaks could pose contamination risks.

Pneumatic systems require a reliable supply of clean, dry instrument air. Moisture can freeze in air lines, while worn seals and air leaks increase energy requirements and maintenance costs. Electric actuators eliminate the need for instrument air, although their long-term reliability and maintenance requirements depend on the specific design.

Hydraulic and electrohydraulic actuators

Hydraulic actuators use pressurized oil to generate substantial thrust or torque from a compact unit. Their high-power density makes them suitable for large, high-pressure valves and emergency shutdown applications requiring rapid movement under heavy loads.

Electrohydraulic actuators use an electric motor to power a hydraulic system. These systems generally have higher upfront costs than electric actuators in comparable industrial valve applications due to additional components such as pumps, reservoirs and controls.

While hydraulics can deliver greater force from a similarly sized unit, fluid leaks, seal wear and filtration requirements add maintenance costs.

What should I consider when selecting an actuator?

Actuator selection should account for the mechanical demands of the equipment and the conditions in which it operates:

  • Mechanical requirements: Confirm the torque or thrust needed under operating load, along with the required rotation angle or stroke length. Check mounting compatibility and linkage requirements for replacement installations.
  • Positioning accuracy: Ask how closely the actuator follows a control signal and whether it overshoots or hunts before reaching its commanded position.
  • Duty cycle and environment: Determine how frequently the actuator must reposition. Motor heating can limit repeated starts, while moisture and corrosive conditions can affect component life.
  • Maintenance and service life: Review lubrication requirements, replacement parts and the technical support offered post-purchase. Account for servicing costs and potential downtime when comparing initial purchase prices.

Choose Beck for precise and reliable actuators

We’ve manufactured actuators for industrial valves and dampers since 1936. Plant teams often come to us when an existing unit requires frequent maintenance or struggles to provide the control their process needs.

Our U.S.-made actuators feature protective housings that shield internal components while allowing convenient access. We provide technical assistance and parts support throughout the life of our products.

If you’re evaluating a replacement or specifying a new actuator, contact us to discuss your requirements and determine the right fit.